aosu SolarCam D1 Max: A Separate Panel and a Camera I Still Want to Test

I have used a SolarCam D1 before, so I am interested in what changes with the D1 Max. This recording starts with the box, though—not with footage from an installed camera.

The solar panel can go somewhere else

I take out the separate panel and look at its mount and USB-C connection. That arrangement gives the panel its own position instead of requiring it to sit directly on the camera.

There are mounting clips, labeled hardware, guides and a charging cable in the box. On the camera, I point out the surrounding lights, speaker and card/button compartment.

Fit the connector and its housing

I plug the panel connection into the camera and screw the outer housing together. It is useful to see how that assembles before choosing a place to mount it.

The threaded connection does not prove weather resistance, and I have not measured charging output or battery life in this session.

My earlier D1 experience is a different result

I talk about the original D1 I had used and the higher-resolution specifications listed for the Max. That is why I want to try it, not evidence of the Max’s actual image quality.

I say I plan to install it and record sample footage next. Night vision, detection, cloud features and any comparison with the older camera still need their own tests.

The original links are below, including the original campaign address. The description lists MikeTheTech for 15% off the aosu store; it is a historical offer to check against current terms. The original outro credit lists http://eme7.com/.