# SVBONY TransAir3: Two Antennas per Box and a Look at the HDMI Layout

> Unpacking the transmitter, receiver and accessories before a transmission test.

Canonical page: https://pyrosoft.pro/blog/no-more-cables-svbony-transair3-wireless-video-extender-fast-easy-setup-daf6ba25

Published: 2026-11-04

Some links to other products on this page are affiliate links, and we may earn a commission if you buy through them. It costs you nothing extra, and it has not changed what this article says — where a competitor is the better answer, we say so.

The antenna pair on each box makes this SVBONY kit look different from the little USB-sized video transmitters I have handled. I take out the transmitter and receiver and work through where the video and power connections go.

The title calls it TransAir3, while my opening readout also mentions ST4 Transmaster. I am following the kit shown in this unboxing, without merging those names into a new model specification.

## The input and output arrangement

I show the transmitter's input and local output connection, then the two HDMI outputs on the receiving side. I also point out the power controls and infrared connections.

That explains the intended layout. It is not a demonstration of a working signal on three screens.

## A fairly complete accessories box

I unpack HDMI and USB-C leads, infrared accessories, the small HDMI adapters and four antennas. I fit the antennas to the boxes and look at the mounting arrangements.

For the audio side of a separate recording setup, my [SVBONY D4 microphone walkthrough](<https://pyrosoft.pro/blog/ultimate-4-transmitter-wireless-mic-svbony-d4-for-iphone-dslr-a93fc26e>) covers a different kit. I am not testing the two products together here.

## The range test is explicitly next

I finish by discussing a future connection and distance test. The minimum latency and open-space range figures I read are advertised claims, not measurements completed in this session.

I do not verify app monitoring, multiple receivers, interference resistance or a particular display mode here. SVBONY supplied the kit; this first result is the hardware layout and accessories, ready for the later transmission tests I propose.

## Links from the video

**Affiliate disclosure:** These links may earn me a commission at no extra cost to you.

- [SVBONY TransAir3 original product/referral link](<https://www.svbony.com/transair3-wireless-transmission/?ref=qatgqohk&srsltid=AfmBOorcLzG48ruAqokR29Ag2-xV6wwPVYik8xqfj9-kPdyvP6UC4l6-&utm_source=goaffpro>)

- [MikeTheTech original Patreon link](<https://www.patreon.com/mikethetech>)

- [Geeksoutfit original clothing-store link](<https://www.geeksoutfit.com/>)

**Coupon code: COLLAB1** — Discount amount not stated. Separate Geeksoutfit offer from the original description, not a discount on the reviewed device. No amount or expiry was supplied; check current terms.

Links and offers are from the video description. Availability, prices and offer terms may change.
